This coronavirus lockdown of 2020 has encouraged a lot of creativity in our household, including the upcycling of old clothes. If you can’t go to the shops, you got to be resourceful! Upcycling is an old hobby of mine and I had a lot of fun making these super quick water bottle carriers out of an old pair of jeans. How I did that? Read on for the DIY tutorial.
Easy DIY water bottle carrier
If you have kids, then as a mum you know that on trips and hikes you are basically a packing donkey carrying everybody’s junk. Right? Now on a hot day, it can get a bit heavy dragging around litres of water for everyone. You also get fed up having to take out the bottles again because little Johnny needs another drink, even though it was only five minutes since the last one. Solution? Let them carry their own water!
It is super easy to make this DIY water bottle carrier out of denim. I don’t claim to be a neat sewer, I am a quick results, practical kind of person, but feel free to make your own improved, beautiful version of this bag. Mine looks pretty good I think, is sturdy enough to hold a bottle and wide enough to carry your phone or small purse too on your walks. I added a little pocket for a snack (or your public transport card!), which took a bit more time, but otherwise, you will have this made less than an hour.
What do you need?
- An old pair of ladies jean trousers, ideally stretchy and tapered at the ankles. It needs to fit snug, but not too snug around your water bottle. You can, of course, use a wider trouser leg for a larger bag that holds more.
- A thick, wide ribbon or fabric belt of a dress or something for the shoulder strap.
- Optional pocket: a different piece of fabric or denim and a button for decoration
Step 1. Cut the trouser leg
You will be using the bottom part of the trouser leg. The best thing is to place your water bottle on top of the leg before you cut. Cut the fabric about 2cm (1”) longer than the bottle is. The hem of the trouser leg will be the top of the bag, so that bit is already done.
Step 2. Sew the bottom of your water bottle bag
Turn the fabric inside out and sew the widest opening (and not the existing hem) shut. Sew a straight line about 2cm/1” from the edge. Cut off the excess and sew a zigzag to finish to prevent the edge from fraying.
3. Add elastic through the top hem
Next I cut two small holes in the top of the existing hem (which of course is a ready-made hollow tube!) and used a safety pin to pull a piece of elastic (19cm) through. Now you could choose to pull a drawstring through the top, but I chose to put elastic in instead. A wider strap is more comfortable on the shoulder than a drawstring, but that doesn’t fit through the small holes of the top hem. Once you have the elastic through, tie both ends together. Tie it so that it makes a slightly smaller, stretchy opening without making it too hard to fit the bottle in. The elastic is really just to keep the bottle in place rather than to close the bag completely.
Step 4. Sew the pocket on
You can leave the bag like it is and skip straight to sewing on the shoulder strap, or you can embellish your DIY water bottle carrier with a handy pocket. I cut out out a piece of around 12 x 10cm of blue denim for contrast, using the bottom hem as the top of the pocket. With the square being quite small, I decided to zigzag the edges instead of folding them over, as that would become too bulky. Once you have done that, sew the pocket onto the bag, either using your machine or stitch it by hand. I added a little button just as a colour accent.
Step 5: Sew on the shoulder strap
The shoulder strap can be pinned onto the bag along the top across the full width. I sewed a straight line both along the top and the bottom of the strap to secure it. The ends of the strap can now be tied around the shoulder, adjusted to the person using it. It will be shorter for a child than for an adult obviously.